News

Home page

Precautions for the use of shielded rooms?

2023-03-06

Summary: The filter power supply must not be connected to a leakage protector.

269/10000
实时翻译
划译
1. The filter power supply must not be connected to a leakage protector, but can be connected to a load circuit breaker; If there is a problem with the filter, it should be disconnected before discharging at the tip for maintenance or replacement.
2. After the goods are entrusted for use, it is strictly prohibited to be subjected to large impacts or to make holes in the barrier body.
3. It is strictly prohibited to insert non-metallic wires or trajectories into the barrier wave drainage pipe holes.
4. Pay attention to maintaining the cleanliness of the blade and groove at the barrier door to ensure excellent performance of the barrier machine room.
5. Clean maintenance method: Use moisture-proof material to separate the reed position and wrap it with a deoxidized bandage. After moistening with anhydrous petroleum, pull out the groove and wipe it with a single pull.
6. To ensure the sensitivity of the opening and closing of the internal transmission components of the barrier door, it is necessary to periodically add flashing lights.
7. If a spring is found, the spring pressing screw should be loosened in a timely manner, the broken spring should be stored, and a new spring should be replaced.

■

Structural characteristics of shielded rooms

2023/03/06

■